• 

Overview of Titanium Rod

Blunt titanium rod and titanium alloy rod are new structural materials, which are characterized by high melting point, low specific gravity, high specific strength, good toughness, fatigue resistance, acid and alkali corrosion resistance, low thermal conductivity, good high and low temperature tolerance, and low stress under rapid cooling and heating conditions. Applied in high-tech fields such as aviation and aerospace, and continuously promoted to industries such as chemical, petroleum, power, seawater desalination, construction, and daily necessities.

Shape

Round rod, square rod, hexagonal rod, irregular rod.

Common grades of titanium rods

National standard grade: TA1、TA2、TA3、TA7、TA9、TA10、TA15、TA18、 TC4、TC4ELI、TC6、TC9、TC10、TC11

American standard grades: GR1, GR2, GR3, GR4, GR5, GR7, GR11, GR12, GR23, etc.

Titanium rod manufacturing process

Hot forging hot rolling annealing straightening turning (polishing) polishing flat head inspection packaging

Titanium rods comply with commonly used standards

national standard: GB/2965-2007、GB/T13810

American standard: ASTM B348、ASTM F136、ASTM F67、AMS4928

Titanium rod specification: (diameter * length/mm): 6mm-250mm*L

Titanium rod supply status: hot processing status, annealing status

Reference standards

1. GB 228 Metallic Tensile Test Method

2. GB/T 3620.1 Grades and Chemical Composition of Titanium and Titanium Alloys

3. GB/T3620.2 Chemical Composition and Allowable Deviation of Titanium and Titanium Alloy Processing Products

4. GB 4698 Chemical analysis methods for sponge titanium, titanium and titanium alloys

Technical requirements for titanium rods

1. The chemical composition of titanium and titanium alloy rods shall comply with the provisions of GB/T 3620.1. When repeated testing is required, the allowable deviation of the chemical composition shall comply with the provisions of GB/T 3620.2.

2. The diameter or side length of the hot processed rod and its allowable deviation shall comply with the corresponding regulations.

3. The allowable deviation of the diameter of hot-rolled, polished, cold-rolled, and cold drawn bars should comply with industry regulations.

4. The roundness of the polished bar after hot processing should not exceed half of its dimensional tolerance

Application of titanium rod:

Aerospace, aviation, navigation, shipbuilding, seawater desalination, petroleum, chemical, mechanical equipment, nuclear power equipment, power equipment, automotive and motorcycle components, sports and leisure, medical components, steel and metallurgy, high-tech fields.